Table of Contents
Advertisement
Troubleshooting guide
Workstation
If "Bogus file system" appears
•
Check cables, see SCSI cables, CD-ROM and Cables general in MAMMOMAT 1000/
3000/3000 Nova - Opdimar Maintenance Instructions.
•
Try to reboot.
•
Reload the software, see Page 6 - 11.
Problem with date in database mode
•
Check the Country Settings Date Pattern: e.g. m/d/y. This defines only the order that the
date will be in. Do not type mm/dd/yy.
Opdima user interface does not appear at log in
Symptom:
After logging in to Opdima, the Mode selection windows does not appear. Instead there
are a few other windows and a message box containing the text:
"The Open Windows environment may no longer be supported in a future release. You
may want to migrate to CDE, the Common Desktop Environment.
Check here to disable this message.
Continue"
Solution:
1.
In the window titled "cmdtool (CONSOLE) - /usr/bin/ksh", write:
rm .dt/sessions/lastsession
and then press the ENTER key. There should be no response to this command.
If there is an error message, e.g. .dt/sesions/lastsession: No such file or directory,
then the command was typed incorrectly; just try again.
2.
Right-click the blue background, choose "Exit..."
3.
In the message box "Please confirm exit from window system", choose "Exit".
4.
Log in again using the same username as previously.
5.
In the message box "Welcome to Solaris. /.../ Choose one: Common Desktop
Environment (CDE) OpenWindows Desktop", make sure "Common Desktop
Environment (CDE)" is checked and then click OK.
No images displayed on monitor
•
If no image on the monitor, check that input select is set to 1.
NOTICE
Siemens AG
Medical Solutions
If removing the cover of the workstation main unit, check that no
copper grounding clip comes loose.
Register 5
SPB7-230.061.11
Rev. 02
Page 5 of 14
07.03
CS PS 24
9 - 5
9
9
9
9
9
Opdimar
Service
Advertisement
Table of Contents
