User-Defined Exam Types
User defined Exam Types are preceded by "u". You can create up to 64 different user exams.
The User Exam page displays the list of User Exams that have been created, including the
real-time settings by Probe type.
Display the list of User Exams that have been created on the User Exams page:
You can display real-time settings by Probe type and create your own Exam Type with the
system settings you prefer.
User Exam Soft Keys:
: deletes User Exams from the system.
: allows you to edit the name of the User Exam; names are limited to nine
: makes the highlighted Exam the active Exam Type.
Creating a new User Exam Type
During real-time scanning, select one of the pre-loaded factory Exam Types — not a User
Exam Type; User Exams are prefaced with the letter "u" (for example, "u Cardio1").
Change the system real-time control settings, such as Depth and Gain, that you prefer for
the exam type you are creating.
When you have specified the settings you want, touch the
. The settings will be saved with the name "u Exam" followed by a number.
You can then rename the Exam in the
NOTE: If you are unable to create new User Exams, you may have exceeded the number of User
Exams the system allows. The system stores a total of 64 User Exams. Delete unused User Exams so
new ones can be created.
Updating a User-Defined Exam with New Settings
During real-time scanning, use the
Change any of the control settings (e.g., Gain, Depth).
For information about saving images to a Patient Study, see the Scanning Chapter.
Soft Key to activate the User Exam you want to
Soft Key, then select
Freestyle User Manual