2
Execute the job cancel process.
03 CANCELING JOB
SELECT FEEDER Menu
This section describes the function of the SELECT FEEDER menu and the
operating procedure for it.
SELECT FEEDER Menu Functions
The SELECT FEEDER menu allows you to select the paper source, paper size,
etc. After a paper source is selected, the corresponding Paper Source indicator
comes on.
NOTE
For more details on the settings, see "SELECT FEEDER Menu Settings," on p. 5-117.
Operating Procedure for the SELECT FEEDER Menu
The SELECT FEEDER menu consists of two hierarchies: "Setting" and "Setting
Value". Select the target items in each hierarchy.
As an example of the setting procedure, this section describes the procedure for
setting TRAY PAPER SIZE to B5. Start the key operation from Step 1.
Operation Procedure
1
Display the SELECT FEEDER menu.
PAPER SOURCE
2
Select the item.
When TRAY PAPER SIZE is selected
TRAY PAPER SIZE→
3
Display the setting value.
=A4
Press [OK].
Pressing [OK] starts the job cancel process.
When not executing the cancel job process, press
any key other than [OK]. After completing the job
cancel, the printer is ready to print.
Press [Feeder Selection].
The SELECT FEEDER menu is displayed.
→
Press [ ] or [ ].
The target item is displayed.
Press [OK].
The selected settings are displayed.
→
Menu Functions and Menu Operation
Key Operation
4
4-15