Viewing And Exporting Event History - Honeywell Touchpoint Plus Technical Handbook

7.14 Viewing and Exporting Event History

The event history for the complete system can be viewed in date order (latest first). The history can be filtered by Alarm,
Fault, Inhibit, or Warning.
7.14.1 To View the Event History:
Touch Menu>Information>Event History
Note: Touchpoint Plus does not adjust automatically for daylight savings time so it will retain a backup of the earlier data if
the clock is backdated (e.g. when ending daylight savings time).
Event data is automatically saved to an installed SD card. The event history data can also be exported to the SD card on
demand.
7.14.2 To Export the Event History:
First touch the SD Card icon to ensure that you have sufficient empty space on the SD card.
Touch Menu>Information>Event History
Export Event .
Note: Microsoft Excel 2003 is limited to a maximum of 65,526 entries. If the report is larger than this a 'file not loaded
completely' message may be generated. Microsoft Excel 2010 has a much larger capacity that should be sufficient for all
Touchpoint Plus generated reports.
Note: Touchpoint Plus does not adjust automatically for daylight savings time so TPPL will retain a backup of the earlier
data if the clock is backdated (i.e. when ending daylight savings time).
7.15 Accessing the System Information and Service Contact Details
Touch
Menu>Information>System information
numbers.
Touch
Menu>Information>Service Contact
support.
7.16 System State and System Failure Relays
The Main Module has three relays (30 VDC or 250 VAC, both 1.7 A):
•
One or both System State relays can activate if there is any active alarm, fault, warning or inhibit in the system (if
configured).
•
The System Failure relay can activate if the safety function of the system is not operating, for example due to a major
fault or power loss.
MAN0984_Iss 3_02/16
Pt. No. 3011M5001_3
Operating Instructions
, then touch the Filter icon of choice or scroll through the list.
. Select the event (use filters if there are too many shown) and touch
to view details about the Firmware, Software and serial
or see the back page for details of how to access technical
92
Touchpoint Plus
Technical Handbook