•
Retain the existing configuration (default): Select the 'Use existing
configuration' check box.
Figure 46-15: Load an INI File in the Software Upgrade Wizard
Note:
If you use the wizard to load an ini file, parameters excluded from the ini file are
assigned default values (according to the .cmp file) and thereby, overwrite values
previously configured for these parameters.
10.
Click Reset; a progress bar is displayed, indicating the progress of saving the files to
flash and device reset.
Figure 46-16: Progress Bar Indicating Burning Files to Flash
User's Manual
Mediant 800B Gateway & E-SBC
808
Document #: LTRT-10298