AudioCodes Mediant 800B User Manual page 406


To configure an IP Profile:
1. Open the IP Profiles table (Setup menu > Signaling & Media tab > Coders &
Profiles folder > IP Profiles).
2. Click New; the following dialog box appears:
3. Configure an IP Profile according to the parameters described in the table below.
4. Click Apply.
Table 19-5: IP Profiles Table Parameter Descriptions
Parameter
General
Index
[IpProfile_Index]
Name
profile-name
[IpProfile_ProfileName]
Media Security
SBC Media Security Mode
sbc-media-security-
behaviour
[IpProfile_SBCMediaSecurity
Behaviour]
User's Manual
Figure 19-8: IP Profiles Table - Add Dialog Box
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 40 characters.
Defines the handling of RTP and SRTP for the SIP entity associated
with the IP Profile.

[0] As is = (Default) No special handling for RTP\SRTP is done.

[1] SRTP = SBC legs negotiate only SRTP media lines, and RTP
media lines are removed from the incoming SDP offer-answer.

[2] RTP = SBC legs negotiate only RTP media lines, and SRTP
media lines are removed from the incoming offer-answer.

[3] Both = Each offer-answer is extended (if not already) to two
media lines - one RTP and the other SRTP.
If two SBC legs (after offer-answer negotiation) use different security
406
Mediant 800B Gateway & E-SBC
Description
Document #: LTRT-10298