Number Manipulation Parameters - AudioCodes Mediant 800B User Manual

Parameter
Reasons for Alternative IP-to-Tel Routing Table
Reasons for Alternative IP-to-
Tel Routing
configure voip > gateway
routing alt-route-cause-ip2tel
[AltRouteCauseIP2Tel]
Forward On Busy Trunk Destination Table
Forward On Busy Trunk
Destination
configure voip > gateway
routing fwd-on-bsy-trk-dest
[ForwardOnBusyTrunkDest]
67.11.15

Number Manipulation Parameters

The number manipulation parameters are described in the table below.
Parameter
configure voip > gateway
manipulation settings > map-
ip-to-pstn-refer-to
[ManipulateIP2PSTNReferTo]
User's Manual
For a detailed description of the table, see 'Alternative Routing Based
on SIP Responses' on page 504.
Defines call failure reason values received from the Tel side (in Q.931
presentation). If a call is released as a result of one of these reasons,
the device attempts to locate an alternative Trunk Group for the call in
the IP-to-Tel Routing table.
The format of the ini file table parameter is as follows:
[AltRouteCauseIP2Tel]
FORMAT AltRouteCauseIP2Tel_Index =
AltRouteCauseIP2Tel_ReleaseCause;
[\AltRouteCauseIP2Tel]
For example:
AltRouteCauseIP2Tel 0 = 3
AltRouteCauseIP2Tel 1 = 1
AltRouteCauseIP2Tel 2 = 17 (Busy Here)
AltRouteCauseIP2Tel 2 = 27 (Destination Out of Order)
For a detailed description of the table, see 'Alternative Routing to
Trunk upon Q.931 Call Release Cause Code' on page 508.
Defines the Forward On Busy Trunk Destination table. This table
allows you to define an alternative IP destination if a trunk is busy for
IP-to-Tel calls.
The format of the ini file table parameter is as follows:
[ForwardOnBusyTrunkDest]
FORMAT ForwardOnBusyTrunkDest_Index =
ForwardOnBusyTrunkDest_TrunkGroupId,
ForwardOnBusyTrunkDest_ForwardDestination;
[\ForwardOnBusyTrunkDest]
For example, the below configuration forwards IP-to-Tel calls to
destination user "112" at host IP address 10.13.4.12, port 5060, using
transport protocol TCP, if Trunk Group ID 2 is unavailable:
ForwardOnBusyTrunkDest 1 = 2,
112@10.13.4.12:5060;transport=tcp;
For a detailed description of the table, see 'Alternative Routing to IP
Destination upon Busy Trunk' on page 510.
Table 67-72: Number Manipulation Parameters
Enables the manipulation of the called party (destination) number
according to the SIP Refer-To header received by the device for
TDM (PSTN) blind transfer. The number in the SIP Refer-To header
is manipulated for all types of blind transfers to the PSTN (TBCT,
ECT, RLT, QSIG, FXO, and CAS).

[0] Disable (default)
1196
Mediant 800B Gateway & E-SBC
Description
(No Route to Destination)
(Unallocated Number)
Description
Document #: LTRT-10298