Parameter
http-proxy http-proxy-
host
[HTTPProxyHost]
EMS Services Table
EMS Services
configure network >
http-proxy ems-serv
[EMSService]
User's Manual
the HTTP-based managed equipment (e.g., IP Phone).
The format of the ini file table parameter is as follows:
[ HTTPProxyHost ]
FORMAT HTTPProxyHost_Index =
HTTPProxyHost_HTTPProxyServiceId,
HTTPProxyHost_HTTPProxyHostId,
HTTPProxyHost_NetworkInterface, HTTPProxyHost_IpAddress,
HTTPProxyHost_Protocol, HTTPProxyHost_Port,
HTTPProxyHost_TLSContext, HTTPProxyHost_VerifyCert;
[ \HTTPProxyHost ]
For a description of the table, see 'Configuring HTTP Proxy Hosts' on
page 287.
Defines an HTTP-based EMS Service so that the device can act as
an HTTP Proxy that enables AudioCodes EMS to manage
AudioCodes equipment (such as IP Phones) over HTTP when the
equipment is located behind NAT (e.g., in the LAN) and EMS is
located in a public domain (e.g., in the WAN).
The format of the ini file table parameter is as follows:
[ EMSService ]
FORMAT EMSService_Index = EMSService_ServiceName,
EMSService_PrimaryServer, EMSService_SecondaryServer,
EMSService_DeviceLoginInterface, EMSService_EMSInterface;
[ \EMSService ]
For a description of the table, see 'Configuring an HTTP-based EMS
Service' on page 289.
1238
Mediant 800B Gateway & E-SBC
Description
Document #: LTRT-10298