Event Representation In Syslog Messages - AudioCodes Mediant 800B User Manual

User's Manual
Message Item
Message Body
Timestamp

60.2.1.1 Event Representation in Syslog Messages

The Syslog message events that the device sends are denoted by unique abbreviations.
The following example shows an abbreviated event in a Syslog message indicating packet
loss (PL):
Apr 4 12:00:12 172.30.1.14 PL:5
20:17:00]
The table below lists the unique event abbreviations:
Error Abbreviation
AA
AC
AL
AO
AP
AR
AT
CC
CE
CS
ES
HO
IA
IC
IG
IP
IR
IS
LC
LF
LM
MI
Version 7.2
Describes the message.
When the Network Time Protocol (NTP) is enabled, a
timestamp string [hour:minutes:seconds] is added to all
Syslog messages.
Table 60-4: Syslog Error Name Descriptions
Invalid Accumulated Packets Counter
Invalid Channel ID
Invalid Header Length
Invalid Codec Type
Unknown Aggregation Payload Type
Invalid Routing Flag Received
Simple Aggregation Packets Lost
Command Checksum Error
Invalid Cell Coder Code
Command Sequence Error
8 sec Timeout Before Disconnect
Host Received Overrun
Invalid AMR Payload
Invalid CID Error
Invalid G723 Code
Invalid payload length
Invalid RTCP Packet
Invalid SID Length
Transmitter Received Illegal Command
Lost Fax Frames In High Speed Mode
Lost Modem Frames In High Speed Mode
Misalignment Error
933
60. Syslog and Debug Recording
Description
[Code:3a002] [CID:3294] [Time:
Error Name Description
Mediant 800B Gateway & E-SBC