Multiple Voip Network Interfaces And Vlan Parameters; Routing Parameters - AudioCodes Mediant 800B User Manual

User's Manual
Parameter
Ethernet Devices table
Ethernet Devices table
configure network >
network-dev
[DeviceTable]

67.2.2 Multiple VoIP Network Interfaces and VLAN Parameters

The IP network interfaces and VLAN parameters are described in the table below.
Table 67-10: IP Network Interfaces and VLAN Parameters
Parameter
IP Interfaces Table
IP Interfaces
configure network >
interface network-if
[InterfaceTable]
VLAN Parameters
[EnableNTPasOAM]

67.2.3 Routing Parameters

The IP network routing parameters are described in the table below.
Version 7.2
Groups on page 130.
Note: For the parameter to take effect, a device reset is required.
Defines Ethernet Devices (VLANs).
The format of the ini file table parameter is as follows:
[ DeviceTable ]
FORMAT DeviceTable_Index = DeviceTable_VlanID,
DeviceTable_UnderlyingInterface, DeviceTable_DeviceName,
DeviceTable_Tagging;
[ \DeviceTable ]
For a detailed description of the table, see Configuring Underlying
Ethernet Devices on page 132.
The table configures IP network interfaces.
The format of the ini file table parameter is as follows:
[InterfaceTable]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress,
InterfaceTable_SecondaryDNSServerIPAddress,
InterfaceTable_UnderlyingDevice;
[\InterfaceTable]
For a detailed description of the table, see 'Configuring IP Network
Interfaces' on page 135.
Defines the application type for Network Time Protocol (NTP) services.

[1] = OAMP (default)

[0] = Control
Note: For the parameter to take effect, a device reset is required.
989
67. Configuration Parameters Reference
Description
Description
Mediant 800B Gateway & E-SBC