AudioCodes Mediant 800B User Manual page 672

Parameter
Match
Source IP Group
src-ip-group-name
[IP2IPRouting_SrcIPGroupName]
Request Type
request-type
[IP2IPRouting_RequestType]
Source Username Prefix
src-user-name-prefix
[IP2IPRouting_SrcUsernamePrefi
x]
Source Host
src-host
[IP2IPRouting_SrcHost]
Source Tags
src-tags
[IP2IPRouting_SrcTags]
User's Manual

Multiple alternative route entries can be configured (e.g.,
Index 1 is the main route - Route Row - and indices 2 through
4 are configured as alternative routes).
Defines the IP Group from where the IP call is received (i.e., the
IP Group that sent the SIP dialog). Typically, the IP Group of an
incoming SIP dialog is determined (or classified) using the
Classification table (see 'Configuring Classification Rules' on
page 657).
The default is Any (i.e., any IP Group).
Note: The selectable IP Group for the parameter depends on the
assigned Routing Policy (in the 'Routing Policy' parameter in this
table). For more information, see 'Configuring SBC Routing
Policy Rules' on page 680.
Defines the SIP dialog request type (SIP Method) of the incoming
SIP dialog.

[0] All (default)

[1] INVITE

[2] REGISTER

[3] SUBSCRIBE

[4] INVITE and REGISTER

[5] INVITE and SUBSCRIBE

[6] OPTIONS
Defines the prefix of the user part of the incoming SIP dialog's
source URI (usually the From URI). You can use special
notations for denoting the prefix. To denote calls without a user
part in the URI, use the $ sign. For available notations, see
'Dialing Plan Notation for Routing and Manipulation' on page 969.
The default is the asterisk (*) symbol (i.e., any prefix). If this rule
is not required, leave this field empty.
Note: If you need to route calls of many different source URI user
names to the same destination, you can use tags (see 'Source
Tags' parameter below) instead of this parameter.
Defines the host part of the incoming SIP dialog's source URI
(usually the From URI).
The default is the asterisk (*) symbol (i.e., any host name). If this
rule is not required, leave this field empty.
Assigns a tag to denote source URI user names corresponding to
the tag configured in the associated Dial Plan.
The valid value is a string of up to 20 characters. The tag is case
insensitive.
To configure tags, see 'Configuring Dial Plans' on page 697.
Note:

Make sure that you assign the Dial Plan in which you have
configured the tag, to the related IP Group or SRD.

Instead of using tags and configuring the parameter, you can
use the 'Source Username Prefix' parameter to specify a
specific URI source user or all source users.
672
Mediant 800B Gateway & E-SBC
Description
Document #: LTRT-10298