Dtmf And Hook-Flash Parameters - AudioCodes Mediant 800B User Manual
Gateway & e-sbc
Hide thumbs
Also See for Mediant 800B:
- User manual (1338 pages) ,
- Installation and maintenance manual (104 pages) ,
- Hardware installation manual (56 pages)
Table of Contents
Advertisement
User's Manual
Parameter
SPRT Transport Ch.0 Max
Payload Size
configure voip > media fax-
modem > SPRT-transport-
channel0-max-payload-size
[V1501SPRTTransportChannel0
MaxPayloadSize]
SPRT Transport Ch.2 Max
Payload Size
configure voip > media fax-
modem > SPRT-transport-
channel2-max-payload-size
[V1501SPRTTransportChannel2
MaxPayloadSize]
SPRT Transport Ch.2 Max
Window Size
configure voip > media fax-
modem > SPRT-transport-
channel2-max-window-size
[V1501SPRTTransportChannel2
MaxWindowSize]
SPRT Transport Ch.3 Max
Payload Size
configure voip > media fax-
modem > SPRT-transport-
channel3-max-payload-size
[V1501SPRTTransportChannel3
MaxPayloadSize]
67.11.2 DTMF and Hook-Flash Parameters
The DTMF and hook-flash parameters are described in the table below.
Parameter
Hook-Flash Parameters
Hook-Flash Code
configure voip > gateway dtmf-supp-
service supp-service-settings > hook-
flash-code
[HookFlashCode]
Version 7.2
Defines the maximum payload size for V.150.1 SPRT Transport
Channel 0.
The range is 140 to 256. The default is 140.
Defines the maximum payload size for V.150.1 SPRT Transport
Channel 2.
The range is 132 to 256. The default is 132.
Defines the maximum window size of SPRT transport channel 2.
The value range is 8 to 32. The default is 8.
Defines the maximum payload size for V.150.1 SPRT Transport
Channel 3.
The range is 140 to 256. The default is 140.
Table 67-41: DTMF and Hook-Flash Parameters
Analog interfaces: Defines the digit pattern that when
received from the Tel side, indicates a Hook Flash event.
Digital interfaces: Defines the digit pattern used by the PBX
to indicate a Hook Flash event. When this pattern is
detected from the Tel side, the device responds as if a Hook
Flash event has occurred and sends a SIP INFO message if
the HookFlashOption parameter is set to 1, 5, 6, or 7
(indicating a Hook Flash). If configured and a Hook Flash
indication is received from the IP side, the device generates
this pattern to the Tel side.
The valid range is a 25-character string. The default is a null
67. Configuration Parameters Reference
Description
Description
1087
Mediant 800B Gateway & E-SBC
Advertisement
Table of Contents
