Configuring Broadsoft's Shared Phone Line Call Appearance For Survivability - AudioCodes Mediant 800B User Manual

User's Manual
</phoneNumbers>
<aliases>
<alias>sip:bob@broadsoft.com</alias>
<alias>sip:rhughes@broadsoft.com</alias>
</aliases>
<extensions>
<extension>5317</extension>
<extension>1321</extension>
</extensions>
</BroadSoftDocument>
The device forwards the 200 OK to the subscriber (without the XML body). The call flow is
shown below:
Figure 37-10: Interoperability with BroadWorks Registration Process
The device saves the users in its registration database with their phone numbers and
extensions, enabling future routing to these destinations during survivability mode when
communication with the BroadWorks server is lost. When in survivability mode, the device
routes the call to the Contact associated with the dialed phone number or extension
number in the registration database.

To enable the BroadWorks survivability feature:
1. Open the SBC General Settings page (Setup menu > Signaling & Media tab > SBC
folder > SBC General Settings).
2. From
(SBCForkingHandlingMode), select Enable:
3. Click Apply.
37.6.2 Configuring BroadSoft's Shared Phone Line Call Appearance for
Survivability
The device can provide redundancy for BroadSoft's Shared Call Appearance feature.
When the BroadSoft application server switch (AS) fails or does not respond, or when the
network connection between the device and the BroadSoft AS is down, the device
manages the Shared Call Appearance feature for the SIP clients.
Version 7.2
the 'BroadWorks Survivability Feature'
725 Mediant 800B Gateway & E-SBC
37. Advanced SBC Features
drop-down list