AudioCodes Mediant 800B User Manual page 663

User's Manual
Parameter
Destination Username Prefix
dst-user-name-prefix
[Classification_DestUsernamePrefix]
Destination Host
dst-host
[Classification_DestHost]
Message Condition
message-condition-name
[Classification_MessageConditionName]
Action
Action Type
action-type
[Classification_ActionType]
Destination Routing Policy
dest-routing-policy
[Classification_DestRoutingPolicy]
Source IP Group
Version 7.2
the device obtains the source URI, in the IP Groups table
('Source URI Input' parameter). For more information on
how the device obtains this URI, see 'Call Processing of
SIP Dialog Requests' on page 619.
The default is the asterisk (*) symbol, which represents any
source host prefix.
Note: For REGISTER requests, the source URI is obtained
from the To header.
Defines the prefix of the destination Request-URI user part
as a matching characteristic for the incoming SIP dialog.
The default is the asterisk (*) symbol, which represents any
destination username. The prefix can be a single digit or a
range of digits. For available notations, see 'Dialing Plan
Notation for Routing and Manipulation' on page 969.
Defines the prefix of the destination Request-URI host
name as a matching characteristic for the incoming SIP
dialog.
The default is the asterisk (*) symbol, which represents any
destination host prefix.
Assigns a Message Condition rule to the Classification rule
as a matching characteristic for the incoming SIP dialog.
By default, no value is defined.
To configure Message Condition rules, see 'Configuring
Message Condition Rules' on page 665.
Defines a whitelist or blacklist for the matched incoming
SIP dialog.

[0] Deny = Blocks incoming SIP dialogs that match the
characteristics of the rule (blacklist).

[1] Allow = (Default) Allows incoming SIP dialogs that
match the characteristics of the rule (whitelist) and
assigns it to the associated IP Group.
Assigns a Routing Policy to the matched incoming SIP
dialog.
The assigned Routing Policy overrides the Routing Policy
assigned to the SRD (in the SRDs table). The option to
assign Routing Policies to Classification rules is useful in
deployments requiring different routing and manipulation
rules for specific calls pertaining to the same SRD. In such
scenarios, you need to configure multiple Classification
rules for the same SRD, where for some rules no Routing
Policy is assigned (i.e., the SRD's assigned Routing Policy
is used) while for others a different Routing Policy is
specified to override the SRD's assigned Routing Policy.
By default, no value is defined.
To configure Routing Policies, see 'Configuring SBC
Routing Policy Rules' on page 680.
Assigns an IP Group to the matched incoming SIP dialog.
663
33. Routing SBC
Description
Mediant 800B Gateway & E-SBC