Command Reference - Sierra Wireless MC8775 Reference Manual

Table 5-1: Test commands (Continued)
Command
!DAWSTXCW
!OSDSM
Table 5-2: Test command details
Command
!DAFTMACT
Supporting Mini Cards:
•
All
!DAFTMDEACT
Supporting Mini Cards:
•
All
Rev 2.9 Oct.08
Set the waveform used by the transmitter
Display memory usage for DSM buffer pools

Command reference

Put the modem into FTM mode
FTM (Factory Test Mode) is a non-signaling mode that allows the radio
component to be manually configured to conduct certain types of tests. AT
commands that start with "!DA" are only available when the modem is in
FTM mode. This command places the modem in FTM mode.
Note: When this command executes successfully, the modem responds
with the value 290300. Any other response indicates an error.
Put the modem from FTM mode into online mode
This command takes the modem out of FTM mode and puts the modem
back into online mode. (The command
FTM mode.)
Note: When this command executes successfully, the modem responds
with the value 290400. Any other response indicates an error.
Description
Description
!DAFTMACT
Test Commands
Page
79
79
puts the modem into
65