Table 8-2: GPS command details (Continued)
Command
!GPSPORTID = <portid>
!GPSPORTID?
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_0_1_4ap)
•
MC8785V
•
MC8790 / 90V
Rev 2.9 Oct.08
Set / query port ID to use over TCP/IP
!GPSSUPLURL
Note: Deprecated.
!GPSIPADDR and !GPSPORTID.
This command sets or reports the port ID of the SUPL server to use when
using TCP/IP as the transport mechanism for SUPL.
Usage:
•
AT!GPSPORTID=<portid> queues the request to set the port ID and
returns OK or Error. indicating if the request is successfully queued
•
AT!GPSPORTID? returns the port ID currently being used
Parameters:
<port ID> (port ID to use)
•
Valid TCP/IP port number
Related commands
!GPSIPADDR
•
(p.122) — Set/query the IP address to use over TCP/IP
GPS Commands
Description
should be used in place of
125