MC87xx Extended AT Command Reference
Table 8-2: GPS command details (Continued)
Command
!GPSPOSMODE = <mask>
!GPSPOSMODE?
!GPSPOSMODE=?
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_2_0_0ap)
•
MC8785V
•
MC8790 / 90V
•
MC8791V
•
MC8792V
126
Configure support for GPS positioning modes
This command enables or disables support for several GPS positioning
modes.
Note: AT!RESET must be issued after this command is used.
Usage:
•
AT!GPSPOSMODE=<mask> uses a single byte hexadecimal format
mask to indicate which GPS positioning modes are to be supported.
•
AT!GPSPOSMODE? returns a <mask> value indicating which GPS
positioning modes are currently supported. For example,
AT!GPSPOSMODE? returns:
MASK: <mask>
•
AT!GPSPOSMODE=? returns supported <mask> values.
Parameters:
<mask> (Bitmap value representing supported GPS positioning modes)
•
1-byte hex format mask (do not include '0x' before the mask value)
•
'On' bits identify modes that are supported
•
Bit 0 — Standalone
•
Bit 1 — UP MS-based
•
Bit 2 — UP MS-assisted
•
Bit 3 — CP MS-based (2G)
•
Bit 4 — CP MS-assisted (2G)
•
Bit 5 — CP UE-based (3G)
•
Bit 6 — CP UE-assisted (3G)
•
Bit 7 — Unused
Example:
AT!GPSPOSMODE=2a enables support for Bit5 (CP UE-based), Bit3 (CP
MS-based), and Bit1 (UP MS-based)
Description
2130616