Table 8-2: GPS command details (Continued)
Command
!GPSXTRATIMEENABLE =
<enable> [, <thresh>,
<delay>]
!GPSXTRATIMEENABLE?
!GPSXTRATIMEENABLE=?
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_2_0_0ap)
•
MC8785V
•
MC8790 / 90V
•
MC8791V
•
MC8792V
Rev 2.9 Oct.08
Set / query GPS XTRA time settings
This command enables or disables GPS XTRA time information, and sets
or reports specific GPS XTRA time settings.
Note: AT!RESET must be issued after this command is used.
Usage:
•
AT!GPSXTRATIMEENABLE=<enable> [,<thresh>, <delay>] enables
or disables time information. If enabled, sets the uncertainty threshold
and delay time to retry with a backup server.
•
AT!GPSXTRATIMEENABLE? returns the current values of GPS XTRA
time parameters. For example, AT!GPSXTRATIMEENABLE? returns:
XTRA Time Info Enabled: <enable>
XTRA Time Uncertainty Threshold: <thresh>
XTRA Time Delay Threshold: <delay>
•
AT!GPSXTRATIMEENABLE=? returns supported <enable>, <thresh>,
and <delay> values.
Parameters:
<enable> (Enable or disable time information)
•
0 — Disable
•
1 — Enable
<threshj> (XTRA time uncertainty threshold, in ms.)
•
100 — 30000
<delay> (Time to delay before retrying with backup server, in ms)
•
100 — 10000
GPS Commands
Description
137