Sierra Wireless MC8775 Reference Manual page 68

MC87xx Extended AT Command Reference
Table 5-2: Test command details (Continued)
Command
!DAGSLOCK
Supporting Mini Cards:
•
All
Note: The modem must be in
FTM mode to use this
command—use
AT!DAFTMACT to enter FTM
mode.
!DAGSRXBURST
=<function>
Supporting Mini Cards:
•
All
Note: The modem must be in
FTM mode to use this
command—use
AT!DAFTMACT to enter FTM
mode.
!DAGSRXCONT
=<function>
Supporting Mini Cards:
•
All
Note: The modem must be in
FTM mode to use this
command—use
AT!DAFTMACT to enter FTM
mode.
68
Return the synthesizer lock state
This command returns a value indicating the lock state of the RF
synthesizers:
•
0 — one or more synthesizers are out of lock
• 1 — all synthesizers are in lock
Note: AT!DASBAND and AT!DASCHAN must be called before you can
use !DAGSLOCK.
Set the GSM receiver to burst mode
This command sets the receiver to start or stop sending bursts. The
receiver must be in burst mode to read the RSSI. (The command
!DAGGRSSI returns the RSSI value.)
Parameters:
<function>:
• 0 = get RSSI (burst mode)
• 2 = stop continuous RX
Note: AT!DASBAND and AT!DASCHAN must be called before you can
use !DAGSRXBURST.
Set the GSM receiver continuously on
This commands sets the GSM receiver so that it is continuously on and not
bursting.
Parameters:
<function>:
• 3 = receiver continuously on
• 4 = receiver off
Note: AT!DASBAND and AT!DASCHAN must be called before you can
use !DAGSRXCONT.
Description
2130616