Table 8-2: GPS command details (Continued)
Command
!GPSPROTOSEL =
<protocol>
!GPSPROTOSEL?
!GPSPROTOSEL=?
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_2_0_0ap)
•
MC8790 / 90V
•
MC8791V
•
MC8792V
Rev 2.9 Oct.08
Control GPS protocol selection
This command sets or reports the current GPS protocol selection method
for User Plane GPS.
Note: AT!RESET must be issued after this command is used.
Usage:
•
AT!GPSPROTOSEL=<protocol> indicates the protocol selection
method to use.
•
AT!GPSPROTOSEL? returns the current <protocol> selection method.
For example, AT!GPSPROTOSEL? returns:
Protocol selection: <protocol>
•
AT!GPSPROTOSEL=? returns supported <protocol> values.
Parameters:
<protocol> (Protocol selection method)
•
0 — None
•
1 — PreSUPL
•
2 — X1
•
3 — SUPL (Secure User Plane Location)
GPS Commands
Description
127