Sierra Wireless MC8775 Reference Manual page 37

Table 3-2: Modem status, customization, and reset commands (Continued)
Command
!EDAEN?
!EDAEN=<enableFlag>
!EDAEN=?
Supporting Mini Cards:
•
All
Note: Only the assignment
operation ("=") is password-
protected.
!EQEN?
!EQEN=?
!EQEN=<enableFlag>
Supporting Mini Cards:
•
MC8775 / 75V (minimum
FW rev: H1_0_0_7 /
H1_1_0_1)
•
MC8780 / 81
•
MC8785V
•
MC8790 / MC8790V
Note: Only the assignment
operation ("=") is password-
protected.
Rev 2.9 Oct.08
Modem Status, Customization, and Reset Commands
Configure protocol stack for Extended Dynamic
Allocation (EDA)
This command enables or disables EDA functionality in the stack.
Note: This command is only supported on devices that support EDA.
Usage:
•
AT!EDAEN? indicates the current <enableFlag> setting—this shows if
EDA is enabled or disabled. If 'ERROR" is returned, assume that EDA
is enabled.
•
AT!EDAEN=? returns a list of valid <enableFlag> values.
•
AT!EDAEN=<enableFlag> enables or disables EDA.
Parameters:
<enableFlag> (enable / disable EDA):
•
0 = Disable
•
1 = Enable (Default) — This value is used for normal operations.
Enable / disable WCDMA L1 equalizer
This command is used to enable / disable the modem's WCDMA L1
equalizer.
Usage:
•
AT!EQEN? returns the current <enableFlag> value.
•
AT!EQEN=? returns a list of supported <enableFlag> values in the
format <enableFlag> – <description>.
•
AT!EQEN=<enableFlag> enables / disables the L1 equalizer.
Parameters:
<enableFlag> (enable / disable L1 equalizer):
•
0 = Disable
•
1 = Enable (Default)
Description
37