Stk Command (<Cmdid>) Parameters - Sierra Wireless MC8775 Reference Manual

Rev 2.9 Oct.08
STK command (<cmdId>) parameters
Set Up Call (<cmdId = 10>)
Table 9-3: Setup Call parameters
Parameter Format
!STKGC <data> parameter — Format:
<method>, <TON>, <NPI>, <address>, <subaddress>, <ccp>, <alphaId1>,
<iconId>, <dispMode>, <alphaId2>, <iconId>, <dispMode>, <redial>, <timeout>
<method> Integer
<TON> Integer
<NPI> Integer
<address> Hex string
<subaddress> Hex string
<ccp> Hex string
<alphaId1> Hex string
<iconId> Integer
<dispMode> Integer
<alphaId2> Hex string
<redial> integer
<timeout> Integer
Description
Call setup method
•
0 — Only if there are no other calls
•
1 — Put all other calls on hold
•
2 — Disconnect all other calls
Type of number
•
0 — Unknown
•
1 — International
•
2 — National
•
3 — Network specific
Numbering plan identifier
•
0 — Unknown
•
1 — ISDN telephony
•
3 — Data
•
4 — Telex
•
9 — Private
Dialing address
Dialing subaddress
Capability configuration parameters
Alpha identifier for user confirmation
Numeric tag of the icon to display (matches the index in
the SIM's image file)
•
0 — No icon
•
1..255 — Icon tag
Icon usage
•
0 — Display icon only (replace any text string or
alphaId)
•
1 — Display with alphaId or text string
Alpha identifier for call setup display
Redial flag
•
Redial not required
•
Redial required
Timeout period (in ms)
STK Commands
151