MC87xx Extended AT Command Reference
Table 8-2: GPS command details (Continued)
Command
!GPSTRACK
(Continued)
!GPSTRANSSEC =
<security>
!GPSTRANSSEC?
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_2_0_0ap)
•
MC8785V
•
MC8790 / 90V
•
MC8791V
•
MC8792V
132
One of the following responses will be received:
•
"OK" if the request is successful, or
•
"ERROR CODE = <value> if the request fails for any reason. See
Table 8-3
on page 139 for a list of error codes.
Related commands:
•
AT!GPSSTATUS—Use this command while the tracking session is in
progress.
•
AT!GPSLOC—Use this command after the session completes to
obtain the result.
Control GPS transport security
This command enables or disables GPS transport security for SUPL GPS
fixes.
Note: AT!RESET must be issued after this command is used.
Usage:
•
AT!GPSTRANSSEC=<security> indicates if transport security is used.
•
AT!GPSTRANSSEC? returns the current <security> setting. For
example, AT!GPSTRANSSEC? returns:
Transport security: <security>
Parameters:
<security> (Transport security state)
•
0 — Disable (Secure TCP/IP is not used)
•
1 — Enable (Secure TCP/IP is used)
Description
2130616