Sierra Wireless MC8775 Reference Manual page 94

MC87xx Extended AT Command Reference
Table 7-3: Voice command details (Continued)
Command
!AVCODECTXG
=<profile>, <value>
!AVCODECTXG?
Supporting Mini Cards:
•
MC8775V
•
MC8785V
•
MC8790V
•
MC8791V
•
MC8792V
94
Set / query the TX gain
This command sets the CODEC TX gain for the specified audio profile.
The CODEC TX gain is applied to the digital signal after its conversion
from the analog domain to provide additional gain range from -84dB to
+12dB in the transmit direction.
This setting is stored in non-volatile memory and persists across power
cycles.
Module-specific details:
•
MC8775V:
· The change to the audio system takes place immediately
if the specified audio profile is active.
· This command has no effect if the specified profile's
external PCM interface is enabled. Use
to disable the interface.
•
MC8785V / MC8790V / MC8791V / MC8792V:
· The change to the audio system takes place the next time
the sound device (re)starts.
· This command has no effect if a PCM audio proifile (ID 6
or 7) is enabled.
Usage:
•
AT!AVCODECTXG=<profile>, <value> sets the CODEC TX gain for
the specified <profile>.
•
AT!AVCODECTXG?<profile> returns the current CODEC TX gain
(<value>) for the specified <profile>.
Parameters:
<profile> (audio profile number):
•
0 = Handset
•
1 = Headset
•
2 = Car kit
•
3 = Speaker phone
•
4 = Auxiliary
•
5 = TTY
•
(MC8785V / MC8790V / MC8791V / MC8792V only)
6 = Auxiliary external PCM (128 kHz clock)
•
(MC8785V / MC8790V / MC8791V / MC8792V only)
7 = Primary external PCM (2 MHz clock)
<value> (gain value—selected <profile>)
•
Min = 0x0000 (mute)
•
Max = 0xFFFF
•
Unity gain = 0x4000
You can calculate the gain in dB using this formula:
Gain = 20 log (<value> / 16384)
10
Note: In the command, <value> is in hexadecimal format. In the
formula, convert <value> to decimal format.
Description
!AVEXTPCMSEL
2130616