Table 8-2: GPS command details (Continued)
Command
!GPSENABLE = <gpsFlag>,
<mtlrFlag>
GPSENABLE?
GPSENABLE=?
Supporting Mini Cards:
•
MC8780 / 81 (Deprecated -
use
!CUSTOM="GPSENABLE")
•
For newer modules, use
!CUSTOM="GPSENABLE"
Rev 2.9 Oct.08
(Deprecated) Enable GPS functionality and MTLR
support
!GPSENABLE
Note: Deprecated.
This command enables or disable GPS functionality if supported by the
USB driver, and enables or disables support for Mobile Terminated
Location Request (MTLR). When GPS functionality is enabled, a new
COM port (labeled NMEA) appears.
Note: You may need to update drivers to support the GPS (NMEA) port.
Note: AT!RESET must be issued after this command is used.
Usage:
•
AT!GPSENABLE=<gpsFlag>, <mtlrFlag> configures the modem's
GPS functionality, and MTLR support settings.
•
AT!GPSENABLE? returns the current state of GPS (enabled /
disabled) and MTLR support. For example, AT!GPSENABLE? returns:
GPS Enabled Flag: <gpsStatus>
MT LR Support: <mtlrFlag>
•
AT!GPSENABLE=? returns supported <gpsFlag> and <mtlrFlag>
values.
Parameters:
<gpsFlag> (set GPS lock status and enable/disable GPS customization)
•
0—Disable GPS functionality
•
1—Enable GPS functionality
<mtlrFlag> (enable/disable support for Mobile Terminated Location
Request)
•
0—Disable MTLR support
•
1—Enable MTLR support
<gpsStatus> (current status of GPS lock)
•
0—Disabled
•
1—Enabled
GPS Commands
Description
should be used instead.
119