Sierra Wireless MC8775 Reference Manual page 78

MC87xx Extended AT Command Reference
Table 5-2: Test command details (Continued)
Command
!DAWSPARANGE
=<PA range>
Supporting Mini Cards:
•
All
Note: The modem must be in
FTM mode to use this
command—use
AT!DAFTMACT to enter FTM
mode.
!DAWSSCHAIN
=<state>
Supporting Mini Cards:
•
MC8780 / 81
•
MC8785V
•
MC8790 / MC8790V
78
Set the PA range state machine
This command sets the PA range state machine in WCDMA operation.
Parameters:
<PA range>:
•
0 = Low gain state of the PA — limited to about 16 dBm output
power (R0=0, R1=0)
• 3 = High gain state of the PA — up to the maximum output
power of the modem (R0=1, R1=1)
Note: AT!DASBAND and AT!DASCHAN must be called before you can
use !DAWSPARANGE.
Enable the secondary receive chain (WCDMA only)
This command enables or disables the secondary receive chain.
Usage:
•
AT!DAWSSCHAIN=<state> enables or disables the secondary receive
chain.
Parameters:
<state> (requested state for secondary receive chain):
• 0 = Off (Disable)
• 1 = On (Enable)
Note: AT!DASBAND and AT!DASCHAN must be called before you can
use !DAWSSCHAIN.
Description
2130616