Table 8-2: GPS command details
Command
!GPSAUTOSTART?
!GPSAUTOSTART=?
!GPSAUTOSTART=
<enable>[, <fixtype>,
<maxtime>, <maxdist>,
<fixrate>]
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_2_3_16ap)
•
MC8785V (minimum
FW rev: J1_0_1_1ap)
•
MC8790 / 90V (minimum
FW rev: K1_0_2_4ap)
•
MC8791V
•
MC8792V
Note: This command is not
password-protected.
Rev 2.9 Oct.08
Command reference
Configure GPS auto-start features
This command configures the GPS auto-start features. Any changes take
effect the next time the modem is reset.
Note: If auto-start is enabled, another GPS session cannot be started.
Usage:
•
AT!GPSCLRASSIST=? returns the expected command format and
supported values.
•
AT!GPSCLRASSIST=<eph>, <alm>, <pos>, <time>, <iono> clears
each assistance data type that is flagged as '1'.
Parameters:
<enable> (Enable / disable the feature):
•
0 = Disabled
•
1 = Enabled (GPS tracking session starts automatically when modem
is reset)
<fixType> (Type of fix to establish)
•
1—Standalone (not supported by a mobile station)
•
2—MS-based only
•
3—MS-assisted only
<maxTime> (Maximum time to wait for a position fix)
•
0–255 — Number of seconds to wait
<maxDist> (Requested accuracy of fix)
•
Entered in decimal format
•
0–4294967279 (0xFFFFFFEF)—Accuracy (in meters) requested for
the fix
•
4294967280 (0xFFFFFFF0)—No preference
<fixrate> (Time beween fixes):
•
1–65535 — Time to wait between fixes (in seconds)
GPS Commands
Description
117