Sierra Wireless MC8775 Reference Manual page 46

MC87xx Extended AT Command Reference
Table 3-2: Modem status, customization, and reset commands (Continued)
Command
!NVPLMN?
!NVPLMN=
<MCC >, <MNC
1
<MCC >, <MNC
n
Supporting Mini Cards:
•
All
!NVPLMNCLR
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_2_3_1ap)
•
MC8785V
•
MC8790 / 90V
!NVPORTMAP?
!NVPORTMAP=
<normMode>
[,<diagMode>]
Supporting Mini Cards:
•
MC8775 / 75V
•
MC8780 / 81
Note: The modem must be in
online mode to use this
command.
46
Provision the PLMN list for Network Personalization
locking
This command is used to provision the list of PLMN (MCC / MNC pairs)
>, ...,
1
used for Network Personalization locking.
>
n
Usage:
•
AT!NVPLMN? returns a list of NV items that can be read or written.
•
AT!NVPLMN=<MCC
six MCC / MNC pairs to the PLMN list
Parameters:
<MCC>—Mobile Country Code
•
3 digits
<MNC>—Mobile Network Code
•
2 digits
Note: This command has no effect on operations when using Sierra
Wireless' 27.010 MUX mode drivers.
Reset Network Personalization data
This command resets the modem's Network Personalization data to
factory defaults.
Change modem port mappings in non-MUX mode
This command is used to change the modem port mappings in non-MUX
mode—the modem must be in online mode (not FTM mode) for this to
work.
Parameters:
<normMode>—Port map in normal mode
→
•
00 = AT
→
•
04 = AT
→
•
05 = AT
→
•
06 = AT
<diagMode>—Port map in diagnostic mode (optional)
→
•
00 = AT
→
•
04 = AT
→
•
05 = AT
→
•
06 = AT
Note: This command has no effect on operations when using Sierra
Wireless' 27.010 MUX mode drivers.
Description
>, <MNC >, ..., <MCC
1 1
UART1
→
EP2, DM UART1
→
EP5, Data EP2 (Recommended default)
→
EP2, Data EP5
UART1
→
EP2, DM UART1
→
EP5, Data EP2
→
EP2, Data EP5
>, <MNC > adds up to
n n
2130616