MC87xx Extended AT Command Reference
Table 3-2: Modem status, customization, and reset commands (Continued)
Command
!NASREL?
!NASREL=?
!NASREL=<nasrel>
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_0_1_6ap)
•
MC8785V
•
MC8790 / MC8790V
Note: Only the assignment
operation ("=") is password-
protected.
42
Query / set supported NAS release compliance version
This command is used to configure the modem to support a specific NAS
(Non-Access Stratum) release compliance version.
Usage:
•
AT!NASREL? reports the NAS release compliance version currently
being used.
For example:
AT!NASREL? <CR>
!NASREL:
NAS Release:
Release 5
OK
•
AT!NASREL=? returns the command format (for !NASREL= ) and the
supported parameter values.
For example:
AT!NASREL=? <CR>
!NASREL: (0-1)
NAS release:
Index, Name
00, Release 99
01, Release 5
OK
•
AT!NASREL=<nasrel> sets the desired version (<nasrel>).
Parameters:
<nasrel> (NAS release compliance version):
•
00 = Release 99 (Default)
•
01 = Release 5
Note: If you use AT!REL, use the default value (1) for that command's
<sgsnr> and <mscr> parameters. You must choose the appropriate
compliance version using AT!NASREL.
Description
2130616