MC87xx Extended AT Command Reference
Table 9-2: STK command details (Continued)
Command
!STKCR=<cmdId>,
<result>[, <data>]
!STKCR=?
Supporting Mini Cards:
•
MC8790 / 90V (minimum
FW rev: K1_0_2_3ap)
•
MC8791V / 92V (minimum
FW rev: K1_0_2_4ap)
Note: This command is not
password-protected.
146
Respond to unsolicited SIM command
This command is used to respond to the last received unsolicited SIM
command, sending the results of the command's execution and any
associated data (dependent on type of command executed).
Note: No response is required for <cmdId = 81>.
Usage:
•
AT!STKCR=<cmdId>, <result>[, <data>] sends the result of the
command that was just executed and any associated data to the SIM.
•
AT!STKCR=? returns the expected command format.
Parameters:
<cmdId> (The STK command identified by the last received unsolicited
SIM command)
•
Hexadecimal format
•
10 — Set up Call command
•
11 — Send SS command
•
12 — Send USSD command
•
13 — Send SMS command
•
14 — Send DTMF command
•
15 — Launch Browser command
•
20 — Play Tone command
•
21 — Display Text command
•
22 — Get Inkey command
•
23 — Get Input command
•
24 — Select Item command
•
25 — Set Up menu command
•
28 — Set Up Idle Mode Text command
•
35 — Language Notification command
<result> (Result of host's attempt to process the <cmdId>)
•
Format is <cmdId>-dependent. See
eters" on page 151
for details.
<data> (Information obtained when <cmdId> was processed on the host)
•
Format is <cmdId>-dependent. See
eters" on page 151
for details.
Description
"STK command (<cmdId>) param-
"STK command (<cmdId>) param-
2130616