Command
!STKC
!STKCR
!STKGC
!STKMS
!STKPD
!STKPLI
a. For some of these modules, a firmware upgrade may be required, as noted in the detailed command listing.
Rev 2.9 Oct.08
STK Commands
Toolkit commands. STK commands are supported on the
MC8790, MC8790V, MC8791V, and MC8792V modems.
Table 1-8: GPS commands
Pg
145
Receive unsolicited SIM command
146
Respond to unsolicited SIM command
147
Retrieve data for unsolicited SIM command
148
Request menu item selection or help from SIM
149
Update STK supported features profile
150
Record local provisioning information
Conventions
The following format conventions are used in this reference:
Character codes or keystrokes that are described with words or
standard abbreviations are shown within angle brackets using
a different font, such as
for a blank space character.
Numeric values are decimal unless prefixed as noted below.
Hexadecimal values are shown with a prefix of 0x, i.e. in the
form 0x3D.
Binary values are shown with a prefix of 0b, i.e. in the form
0b00111101.
Command and register syntax is noted using an alternate font:
!CHAN=<c>[,b]
included before all commands except as noted in the reference
tables.
This chapter describes SIM Application
Description
<CR>
for Carriage Return and
AT
. The "
" characters are not shown but must be
About This Guide
Supporting
Mini Cards
a
MC8790 / 90V
MC8791V
MC8792V
MC8790 / 90V
MC8791V
MC8792V
MC8790 / 90V
MC8791V
MC8792V
MC8790 / 90V
MC8791V
MC8792V
MC8790 / 90V
MC8791V
MC8792V
MC8790 / 90V
MC8791V
MC8792V
<space>
25