Table 3-2: Modem status, customization, and reset commands (Continued)
Command
!MXPORTMAP?
!MXPORTMAP=<mode>
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_1_0_2ap)
•
MC8785V
•
MC8790 / 90V
Rev 2.9 Oct.08
Modem Status, Customization, and Reset Commands
Query / set MUX mode port mappings
This command is used to set the modem's MUX-mode DLCI port
mappings for AT and PDP2.
Usage:
•
AT!MXPORTMAP? reports the current port mapping.
For example:
AT!MXPORTMAP? <CR>
00 (or 01)
OK
•
AT!MUXMODE=<mode> selects the new port mapping
Parameters:
<mode> (Port map used in MUX-mode):
•
00 = Default
AT uses DLCI port 2
PDP2 uses DLCI port 6
•
01 = Carrier-specific
AT uses DLCI port 6
PDP2 uses DLCI port 2
Description
41