Sierra Wireless MC8775 Reference Manual page 122

MC87xx Extended AT Command Reference
Table 8-2: GPS command details (Continued)
Command
!GPSIPADDR = <ipaddr>
!GPSIPADDR?
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_0_1_4ap)
•
MC8785V
•
MC8790 / 90V
!GPSKEEPWARM =
<enableFlag>
!GPSKEEPWARM=?
!GPSKEEPWARM?
Supporting Mini Cards:
•
MC8780 / 81
•
MC8790 / 90V
•
MC8791V
•
MC8792V
122
Set / query IP address to use over TCP/IP
!GPSSUPLURL
Note: Deprecated.
!GPSIPADDR and !GPSPORTID.
This command sets or reports the IP address of the SUPL server to use
when using TCP/IP as the transport mechanism for SUPL.
Usage:
•
AT!GPSIPADDR=<ipaddr> queues the request to set the IP address
and returns OK or Error. indicating if the request is successfully
queued
•
AT!GPSIPADDR? returns the address currently being used
Parameters:
<ipaddr> (IP address to use)
•
Standard IP address format. For example,
AT!GPSIPADDR=63.162.134.132
Related commands
!GPSPORTID
•
(p.125) — Set/query the port ID to use over TCP/IP
Set / clear / query Keep Warm functionality
This command sets, clears, or queries the modem's 'keep warm'
functionality. This functionality downloads GPS assistance data from the
GPS server.
Usage:
•
AT!GPSKEEPWARM=<enableFlag> enables / disables the keep warm
functionality.
•
AT!GPSKEEPWARM=? displays valid <enableFlag> options.
•
AT!GPSKEEPWARM? displays the current status (<enableFlag>) of
the keep warm functionality and indicates if GPS is in 'warm' state
(<warmStatus>).
Parameters:
<enableFlag> (Enable / disable keep warm functionality)
•
0 = Disable
•
1 = Enable
<warmStatus> (GPS is in Warm state)
•
0 = No
•
1 = Yes
Example:
AT!GPSKEEPWARM? returns:
KeepWarm Enabled: 1
Warm Status: 1
In this example, KeepWarm is enabled, and GPS is in Warm state.
Description
should be used in place of
2130616