MC87xx Extended AT Command Reference
Table 8-2: GPS command details (Continued)
Command
!GPSMTLRSETTINGS =
<notifyResp>
!GPSMTLRSETTINGS?
!GPSMTLRSETTINGS=?
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_2_3_13ap)
•
MC8785V (minimum
FW rev: J1_0_1_3ap)
•
MC8790 / 90V
•
MC8791V
•
MC8792V
!GPSNIQOSTIME =
<timeout>
!GPSNIQOSTIME?
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_2_0_0ap)
•
MC8785V
•
MC8790 / 90V
•
MC8791V
•
MC8792V
124
Set / query MT location request settings
This command sets or reports the current MT (mobile-terminated)
Location Request settings.
Note: AT!RESET must be issued after this command is used.
Usage:
•
AT!GPSMTLRSETTINGS=<notifyResp> indicates how MT location
request will be handled.
•
AT!GPSMTLRSETTINGS? returns the current <notifResp> setting.
•
AT!GPSMTLRSETTINGS=? returns valid <notifResp> values.
Parameters:
<notifResp> (Notification response setting)
•
0 = Default setting as defined in 3GPP specification 29.002. (See the
NotificationToMSUser enumeration for details).
•
1 = Accept all MT location requests.
•
2 = Reject all MT location requests.
•
3 = User will be asked to accept or reject every MT location request.
Set / query GPS QoS timeout period for network-
initialized fixes
This command sets or reports the current GPS QoS timeout period for
network-initiated fixes.
Note: AT!RESET must be issued after this command is used.
Usage:
•
AT!GPSNIQOSTIME=<timeout> sets the new timeout period.
•
AT!GPSNIQOSTIME? returns the current <timeout> period. For
example, AT!GPSNIQOSTIME? returns:
QoS time: <timeout>
Parameters:
<timeout> (GPS QoS timeout period)
•
Timeout period (in seconds)
Description
2130616