Sierra Wireless MC8775 Reference Manual page 149

Table 9-2: STK command details (Continued)
Command
!STKPD=<bitmask>
!STKPD=?
!STKPD?
Supporting Mini Cards:
•
MC8790 / 90V (minimum
FW rev: K1_0_2_3ap)
•
MC8791V / 92V (minimum
FW rev: K1_0_2_4ap)
Note: This command is not
password-protected.
Rev 2.9 Oct.08
Update STK supported features profile
This command is used to tell the SIM which STK features are supported
by the host.
Note: The modem must be restarted before the new profile information
takes effect. (The modem downloads the profile to the SIM automatically
each time it resets.)
Usage:
•
AT!STKPD=<bitmask> stores the new profile on the host. The profile
will be downloaded the next time the modem resets.
•
AT!STKPD=? returns the expected command format.
•
AT!STKPD? returns the current profile <bitmask>.
Parameters:
<bitmask> (Supported STK features)
•
Format: Seven hexadecimal bytes
·
Byte order: 07 06 05 04 03 02 01
·
Bit order: 76543210
•
Example:
·
"0A000000000001" — "Number of character support across
ME" = 10 and "Menu selection support" = enabled. All other values
are 0.
•
In the 'bit' references below, the code in brackets — "(BXbY)" — refers
to the bit position in the terminal profile message defined in
3GPP TS 11.14, where "BX" = byte X, and "bY" = bit Y.
•
Byte 01
·
Bit 0 — Menu selection support (B1b4)
·
Bit 1 — Support for alpha in call control (B2b5)
·
Bit 2 — UCS2 entry support (B2b6)
·
Bit 3 — UCS2 display support (B2b7)
·
Bit 4 — Display Text command support (B3b1)
·
Bit 5 — Get Inkey command support (B3b2)
·
Bit 6 — Get Input command support (B3b3)
·
Bit 7 — Play Tone command support (B3b5)
•
Byte 02
·
Bit 0 — Select Item command support (B4b1)
·
Bit 1 — Send SMS command support (B4b2)
·
Bit 2 — Send SS command support (B4b3)
·
Bit 3 — Send USSD command support (B4b4)
·
Bit 4 — Set Up Call command support (B4b5)
·
Bit 5 — Set Up Menu command support (B4b6)
·
Bit 6 — Set Up Idle Mode Text command support (B8b5)
·
Bit 7 — Second alpha in setup call support (B8b7)
STK Commands
Description
149