MC87xx Extended AT Command Reference
Table 8-2: GPS command details (Continued)
Command
!GPSXTRATIMEURL =
<urlIndex>, <url>
!GPSXTRATIMEURL?
Supporting Mini Cards:
•
MC8780 / 81 (minimum
FW rev: F1_2_0_0ap)
•
MC8785V
•
MC8790 / 90V
•
MC8791V
•
MC8792V
!NVENGPS = <enableFlag>
!NVENGPS?
Supporting Mini Cards:
•
MC8775V (minimum
FW rev: H1_1_2_2ap)
•
Deprecated for newer
modules—use
!CUSTOM="GPSENABLE"
138
Set / query GPS XTRA SNTP server URLs
This command sets or reports the URLs of up to three GPS XTRA SNTP
(Simple Network Time Protocol) servers.
Note: AT!RESET must be issued after this command is used.
Usage:
•
AT!GPSXTRATIMEURL=<urlIndex>,<url> sets the URL used for the
primary, secondary, or tertiary data server.
•
AT!GPSXTRATIMEURL? returns the URLs of the primary, secondary,
and tertiary SNTP servers. For example, AT!GPSXTRATIMEURL?
returns:
XTRA SNTP Primary Server: <url 1>
XTRA SNTP Secondary Server: <url 2>
XTRA SNTP Tertiary Server: <url 3>
Parameters:
<urlIndex> (Server index)
•
1 — Primary server
•
2 — Secondary server
•
3 — Tertiary server
<url> (Server URL)
•
URL string includes quotes
•
Example: "xtra1.gpsoneextra.net"
•
Maximum string length = 128 characters
Enable / disable GPS functionality
This command enables or disables GPS functionality if supported by the
USB driver. When GPS functionality is enabled, a new COM port (labeled
NMEA) appears.
Note: You may need to update drivers to support the GPS (NMEA) port.
Usage:
•
AT!NVENGPS=<enableFlag> enable or disables GPS functionality.
•
AT!NVENGPS? returns the current setting.
Parameters:
<enableFlag> (enable / disable GPS functionality)
•
00—GPS disabled
•
01—GPS enabled
Note: AT!RESET must be issued after this command is used.
Description
2130616