Sierra Wireless MC8775 Reference Manual page 28

MC87xx Extended AT Command Reference
Table 2-2: AT command password details (Continued)
Command
!SETCND
=<"Key">
Supporting Mini Cards:
•
All
28
Set AT command password
This allows you to change the password that you enter using the
command. Before you can change the password using !SETCND, you must
enable access to this command using !ENTERCND.
Parameters:
<"Key"> (new password):
• Password must be entered with quotation marks (for example,
AT!ENTERCND="NewPW").
• Password length = 4–10 characters (0–9, A–Z, upper or lower case)
Warning: Do NOT enter a null password (that is, the
<"Key"> cannot be "") — you will NOT be able to use
password-protected commands, and will have to contact
Sierra Wireless for help to reset the password.
Description
!ENTERCND
2130616