Introduction - Sierra Wireless MC8775 Reference Manual

3: Modem Status, Customization,
and Reset Commands
•

Introduction

• Command summary
• Command reference
Table 3-1: Modem status commands
Command
!BPLMNTIMER
!BSMCCHECK
!CMEN
!CUSTOM
!DARPEN
!DTEMP
!DTMEN
!EDAEN
!EQEN
!GCFEN
!GCFUIMTYPE
!HSDCAT
!HSUCAT
!LEDCTRL
!MXPORTMAP
!NASREL
!NVENCRYPTIMEI
Rev 2.9 Oct.08
Introduction
This chapter describes commands used to reset the modem,
adjust customization settings, retrieve the hardware version,
and monitor the temperature, voltage, and modem status.
Command summary
The table below lists the commands described in this chapter.
Description
Query / set data inactivity timer value
Return the modem hardware version
Enable / disable HSPA Compressed Mode stack functionality
Set / query customization settings
Enable / disable Downlink Advanced Receiver Performance
(DARP) for Single-Antenna Interference Cancellation (SAIC)
Return the internal temperature of the modem
Enable / disable Dual Transfer Mode stack functionality
Configure protocol stack for Extended Dynamic Allocation
(EDA)
Enable / disable WCDMA L1 equalizer
Enable / disable GCF test mode
Query / set current SIM type
Query / set HSDPA category
Query / set HSUPA category
Query / set LED control pattern
Query / set MUX mode port mappings
Query / set supported NAS release compliance version
Write unencrypted IMEI to modem
3
Page
31
31
32
33
35
36
36
37
37
38
38
39
39
40
41
42
43
29