Sierra Wireless MC8775 Reference Manual page 39

Table 3-2: Modem status, customization, and reset commands (Continued)
Command
!HSDCAT?
!HSDCAT=?
!HSDCAT=<category>
Supporting Mini Cards:
•
MC8775 / 75V (minimum
FW rev: H2_0_1_0mcap)
•
MC8780 / 81
•
MC8785V
•
MC8790 / MC8790V
Note: This command is not
password-protected.
!HSUCAT?
!HSUCAT=?
!HSUCAT=<category>
Supporting Mini Cards:
•
MC8780 / 81
•
MC8785V
•
MC8790 / MC8790V
Note: This command is not
password-protected.
Rev 2.9 Oct.08
Modem Status, Customization, and Reset Commands
Query / set HSDPA category
This command is used to indicate the UE's current HSDPA category.
Usage:
•
AT!HSDCAT? returns the current HSDPA <category>
•
AT!HSDCAT=? returns a list of supported <category> values in the
format (<category> | <category> | ... )
•
AT!HSDCAT=<category> sets the HSDPA category.
Parameters:
<category> – HSDPA category
•
Valid values: 6, 8, 12 (For descriptions of HSDPA categories, see
Table 1 on page 169.)
Note: Older model UEs do not support the higher-speed HSDPA
categories.
Query / set HSUPA category
This command is used to indicate the UE's current HSUPA category.
Usage:
•
AT!HSUCAT? returns the current HSUPA <category>
•
AT!HSUCAT=? returns a list of supported <category> values in the
format (<category> | <category> | ... )
•
AT!HSUCAT=<category> sets the HSUPA category.
Parameters:
<category> – HSUPA category
•
Valid values: 3, 5 (For descriptions of HSUPA categories, see
on page 169.)
Note: Older model UEs do not support HSUPA.
Description
Table 1
39