Installation; Handling Precautions; Installation Environment - Mitsubishi Electric SW0DNC-MNETH-B User Manual

6 PROCEDURE AND SETTINGS UP TO THE POINT OF OPERATION

6.3 Installation

6.3.1 Handling precautions

WARNING
CAUTION

6.3.2 Installation environment

CAUTION
6 - 7
This section explains precautions when handling the MELSECNET/H board and the
installation environment.
The following are precautions to be noted when handling the MELSECNET/H board.
• While energizing, do not touch the connector.
Doing so may result in electric shock or cause malfunctioning.
• Do not directly touch the conductive section of the board.
Doing so could result in malfunctioning or breakdown of the board.
• Before handling the board, touch a grounded metal object to discharge the static
electricity from the human body.
Failure to do so may cause failure or malfunction of the board.
• Handle the board in a location where there is no static electricity.
Static electricity could result in failure or malfunctioning.
• The board is packed in a bag for preventing static electricity.
Always place the board in this bag when storing or transporting.
Otherwise, failure or malfunctioning may result.
• Take care that foreign objects such as chips or wiring debris do not get into the PC.
This could result in fire, breakdowns or malfunctioning.
• Do not dismantle or rebuild the board.
This will result in failure, malfunctioning, injury or fire.
• When disposing of the product, handle it as an industrial waste.
• Do not drop the board or subject it to strong impact.
This will result in failure or malfunctioning of the board.
Refer to the instruction manual accompanying the PC module regarding installation of
the PC module in which the MELSECNET/H board is mounted.
• Always ground the PC module using grounding type D (Class 3 grounding).
Otherwise, there is the risk of malfunctioning.
MELSEC
6 - 7