Configuration Information - Hitachi Compute Blade 500 Series Web Console Users Manual

Assign firmware to Server Blade (Selecting LPAR manager F/W
version)
Table 2-72 Items in Assign firmware to Server Blade (Selecting LPAR
Server Blade No.
LP firmware version pull down
list
Item
Next
Cancel Cancels the settings and closes the Assign firmware to Server Blade (Selecting
Tip: In SMP configuration, settings for the primary server blade are applied.
If a non-primary server blade is selected, the settings are shown but LPAR
manager will not operate with those setting values.
Assign firmware to Server Blade (Operating LPAR manager

configuration information)

2-76
Item
Table 2-73 Action button at the bottom
Confirms the LPAR manager firmware version and goes to the Assign firmware to
Server Blade (Operating LPAR manager configuration information).
LPAR manager F/W version) dialog box.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
manager F/W version)
Shows the target server blade to assign LPAR
manager firmware.
Selects an LPAR manager firmware version.
Description
Description