Hitachi Compute Blade 500 Series Web Console Users Manual page 54

LP
Item
Show LP
settings
Edit Server
Blade settings
2-44
Item
Logical Partitioning
Server blade0
Server blade2
Table 2-42 Action buttons at the bottom
[Management module firmware version A023X or earlier]
Shows the LPAR manager settings dialog box. For details of how to
use the dialog box, see
[Management module firmware version A0240 or later]
Moves to the
tab on page 2-72
Sets the server blade operation: Smart Configure setting at the power
recovery.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
regardless of N+M cold standby
settings.
Shows whether or not to operate LPAR
manager on the server blade.
Enabled: Performs LPAR manager.
Setting details are shown in the
tab on page
Disabled: Normal OS starts without
performing LPAR manager.
LP Shows the LPAR manager firmware
version version assigned to the server blade in
LP mode. For Basic-mode server
blades, "--------" is shown.
LP Model Shows an LPAR manager model.
Upper Shows the latest version of LPAR
bound of manager firmware available.
version
LP Shows the LPAR manager firmware
version version assigned to the server blade in
LP mode. For Basic-mode server
blades, "--------" is shown.
LP Model Shows an LPAR manager model.
Upper Shows the latest version of LPAR
bound of manager firmware available.
version
Description
LPAR tab on page
LPAR manager tab on page
displays the LP settings.
Description
LPAR
2-87.
2-87.
2-72. The LPAR manager