Hitachi Compute Blade 500 Series Web Console Users Manual page 67

Item
Authentication
method
Port number
(Authentication)
Shared Secret
Retransmit retry
Timeout
period(sec)
RADIUS server2 Same as the
settings RADIUS server1
settings.
RADIUS server3
settings
Table 2-59 Action buttons at the bottom
Item
Restart Restarts BMC.
BMC
In addition to BMC re-start, you can turn on the sub-power of the server
blade. If you turn on the sub-power when the main power is on, the main
power is turned off.
Edit Shows the BMC settings available to edit. Select one from the following.
BMC time; Network; BMC User accounts; IPMI/SMASH user accounts; Server
blade Web console; Remote console; IPMI over LAN; SMASH (WS-
Management); SMASH (CLP); Asset information; Edit certificate; SSH Host
Key settings.
If the new value doesn't show up after editing, wait for a while and then click
the Refresh button on the upper right to refresh the window.
Note: When selecting the primary server blade, you can restart either the
primary server blade or all server blades in SMP configuration simultaneously.
Hitachi Compute Blade 500 Series Web Console User's Guide
Select an authentication method.
• PAP
• CHAP
• MS-CHAPv2
Enter the destination port number for
authentication of the RADIUS server.
Specify 1812 or a value in the range from 1 to
65535 for the port number.
Enter a key character string shared between BMC
and the RADIUS server.
You can enter a character string of 32 to 64
characters. The string can contain alphanumeric
characters and the following symbols: . _ $ - = +
* % ? : @ / \ ' ! ~ ; ^ ( ) [ ] { } | , `
The symbols <, >, &, #, ", and spaces cannot be
used.
Enter the number of times to reconnect to the
RADIUS server if the RADIUS server does not
respond. Specify 3 time or a value in the range
from 1 to 10 times.
Enter the period (in seconds) from when the
RADIUS server does not respond to when a
timeout occurs. Specify 10 seconds or a value in
the range from 1 to 60 seconds.
Same as the RADIUS server1 settings.
Description
Operating the Web Console
Description
2-57