Hitachi Compute Blade 500 Series Web Console Users Manual page 194

Item
Module
Slot
XID
System
event log
Message
Check
Mark as confirmed.
Mark as unconfirmed. Returns a confirmed event that you select to be unconfirmed.
Select all
Show all SELs
Show details
Optional Physical WWN change log
This window shows Optional Physical WWN change log history. Optional
Physical WWNs are switched at N+M cold standby and changed at the return
to the original state.
2-184
: A module has an error that stops the module working. Check details
of the failed event and remove the problem.
Shows the module where an error event occurred.
Shows the slot number of the module installed.
Shows the code to indicate the event.
Shows a brief description about the event. With warning or failed event,
click the message to open the dialog box for details.
Shows that the event has been checked.
Blank: This event has been checked. Checked events are not included in
the number of events shown in the system event log summary.
!: This event is not checked. Unchecked events are included in the number
of events shown in the system event log summary.
Table 2-224 Action button at the bottom
Item
Confirm an unconfirmed event that you select.
Selects all events.
Shows all registered event logs. The initial setting shows the
latest 100 events.
Warning and failed level events provide their details. Some events
may have no details.
This button is not available if with no details.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description