Hitachi Compute Blade 500 Series Web Console Users Manual page 123

Item
Note:
1 Shows the new LPAR settings / the LPAR settings before modifying.
.
Table 2-125 Action button at the bottom
Item
Back Return to the Modify LPAR dialog box.
OK Save the settings and closes the Modify LPAR (confirmation) dialog box.
Cancel Cancels settings and closes the Modify LPAR (confirmation) dialog box.
• Add LPAR
Hitachi Compute Blade 500 Series Web Console User's Guide
HBA Assigned Shows a card type, controller number,
number scheduling mode, port number, vfcID, World
Wide Node Name, World Wide Port Name,
and Boot settings.
[Management module firmware version
A0205 or later]
Shows the number of a server blade in which
the card is installed and the card type in SMP
configuration.
NIC Assigned Shows a card type, controller number,
number scheduling mode, port number, segment
number, Virtual NIC Number, and MAC
address.
[Management module firmware version
A0205 or later]
Shows the number of a server blade in which
the card is installed and the card type in SMP
configuration.
USB Assigned [Management module firmware version
number A0205 or later]
Shows the type of a port.
Shows the number of a server blade in which
USB is installed and the port type in SMP
configuration.
Boot Mode [Management module firmware version
A0205 or later]
Shows a boot mode of the LPAR.
Description
Operating the Web Console
Description
2-113