Hitachi Compute Blade 500 Series Web Console Users Manual page 63

Item
Priority
(Available only with CB 520X
and CB 520H B3 or later)
DNS(IPv4) DNS
server 1
DNS
server 2
DNS
server 3
DNS(IPv6) DNS
server 1
(Available only
with CB 520X and
DNS
CB 520H B3 or
server 2
later)
DNS
server 3
Item
Use Enable or Disable Syslog transfer.
When enabled, server blade system logs are transferred to an external
Syslog server.
Target syslog Specify a Syslog server to transfer system logs as IP address in
server XXX.XXX.XXX.XXX format or FQDN using up to 127 characters.
Item
LDAP server Use
settings
User authentication
method
LDAP server1
LDAP server2
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Table 2-55 DNS items
Select IPv4 or IPv6.
If IPv4 is selected, BMC will use an IPv4 DNS server
preferentially.
If IPv6 is selected, BMC will use an IPv6 DNS server
preferentially.
Type a DNS server IP address. You can set up to three
IPv4 addresses, which will be used from DNS server 1 in
order.
When not setting DNS server 2 and 3, leave those fields
blank. If not using DNS, leave three fields blank.
Type a DNS server IP address. You can set up to three
IPv6 addresses, which will be used from DNS server 1 in
order.
When not setting DNS server 2 and 3, leave those fields
blank. If not using DNS, leave three fields blank.
Table 2-56 Syslog transfer items
Description
Table 2-57 LDAP items
Select Disable or Enable. With this item
enabled, BMC will use LDAP for SMASH
authentication.
If you enable this item, you cannot use the
RADIUS functionality.
Select one of the following user authentication
methods.
LDAP authentication only
If Local authentication fails, try LDAP
authentication
Specify LDAP server(s) as IPv4 address in
XXX.XXX.XXX.XXX format or FQDN using up to
127 characters. BMC uses LDAP (StartTLS) as
Description
Description
2-53