Hitachi Compute Blade 500 Series Web Console Users Manual page 128

Notes:
1
.
2-118
Item
Slot
Controller
number
Scheduling
mode
Port
Boot function
WWN/MAC
Note
Start remote
console button
HBA boot
settings button
Add to boot
order button
Shows LPAR boot order.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
LinkDown: Cannot be used due to disconnecting
cable.(HBA)
ErrorCheck: Cannot be used due to irreparable
error.(HBA)
Standby: Standby status of virtual LAN segment
(PXE)
Down: Down status of virtual LAN segment (PXE)
Active: Active status of virtual LAN segment
(PXE)
Fault: Fault status of virtual LAN segment (PXE)
Bootable: Can be used as the boot device.
Not bootable: Cannot be used as the boot device.
Shows the card type.
[Management module firmware version A0240 or
later]
Shows the controller number.
[Management module firmware version A0240 or
later]
Shows the scheduling mode.
Shows the port number and segment number.
Shows the boot function configuration. Shows the
boot configuration of the target HBA port.
(When selecting the HBA tab)
USB tab: Shows "-----" constantly.
HBA tab: Shows WWN of logical port or storage
device.
PXE tab: Shows MAC address of logical port.
USB tab: Shows the number of device that
connects to ports.
HBA tab: Shows the number of device that
connects to ports, or shows the LU number.
PXE tab: Shows the number of device that
connects to ports.
Starts the remote console to add or delete the
USB device.
(When selecting the USB tab)
Shows the HBA boot settings dialog box for the
selected port.
(When selecting the HBA tab)
Adds the selected device to the boot order.