Hitachi Compute Blade 500 Series Web Console Users Manual page 60

User account
9
Use
Enable login
HTTPS port number
TLS version TLSv1.0
Use
Port number
TLS
version
Note: The following numbers are not available for the port number to remote
console because they are used for SMASH features.
5985, 5986, 5988, 5989
Use
2-50
Item
Table 2-47 Server blade Web console items
Item
Select Disable or Enable. Server blade Web console can be
connected only with https. With this item disabled, BMC will reject
https connection and the remote console will not be available.
Select Disable or Enable. The default value is Enable. With this
item disabled, https connection is available but login is not.
Server blade Web console port number: 443
This port number cannot be changed
Select Disable or Enable.
TLSv1.1 If a TLS version is disabled, the server blade Web console using
that version cannot be connected.
TLSv1.2
When security strength is set to high, only TLSv1.2 is enabled
while other versions are fixed: Disable.
Table 2-48 Remote console items
Item
Select Disable or Enable. With this item disabled, BMC will reject
connection requests from KVM/vMedia clients.
Type the port number to accept connection requests from KVM/
vMedia clients. Specify 5001 or a number between 1024 and
65535 for the port number. See Note below.
TLSv1.0 Select Disable or Enable.
TLSv1.1 If a TLS version is disabled, the server blade remote console using
that version cannot be connected.
TLSv1.2
When security strength is set to high, only TLSv1.2 is enabled
while other versions are fixed: Disable.
Table 2-49 IPMI over LAN items
Item
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description
Description
Description
Select Disable or Enable. With this item
disabled, BMC will discard RMCP/RMCP+
packets.