Hitachi Compute Blade 500 Series Web Console Users Manual page 92

VNIC System No.
LP ID
Time zone
Confirm
Cancel
LP CLI Settings
User authentication
2-82
Item
set as 0.0.0.0. If the field is blank, LPAR manager may fail to start
up.
Specify a VNIC system number.
Note that, in order to prevent MAC address duplication in the shared
NIC and virtual NIC, the VNIC system number is used to generate
MAC addresses.
You need to specify a unique number for all the LP systems,
including Compute Blade Series.
For a VNIC system number, specify a value equal to or greater than
1. The maximum value varies depending on the LP firmware version.
Defining the ID for LPAR manager authentication.
Set with 16 characters or less. The available characters are
alphanumeric, ~, @, $, #, %, ^, -, +, =, _, ., [, and ].
As a default, a value which figures omitting "." from LP IP address
follow "LP_" is set.
Sets your time zone.
Table 2-82 Action button at the bottom
Item
Table 2-83 LP CLI Setting items
Item
Enable or disable LP CLI user authentication.
This item is displayed only if the server blade is powered
on.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description
Description
Shows the Confirming dialog box.
Cancels the setting and returns to the LP Setting dialog
box.
Description