Hitachi Compute Blade 500 Series Web Console Users Manual page 138

Tip:
• Trunk port VLAN ID of Link Aggregation and Ethernet port settings are
able to set up to 945 characters. However, the maximum number of
characters may be decreased according to the type or port number of
switch module. You cannot set over 945 characters.
• Only for Hitachi 1Gb LAN switch module (40 ports), you can set over 945
characters. However, you cannot set through the Web console, set using
the switch module that is connected directly.
For settings, see Compute Blade Built-in LAN Switch Module Software
Manual Configuration Settings, Vol. 1.
For Brocade 8 Gb fibre channel switch module/Brocade 16 Gb fibre channel
switch module:
Switch module web
console
For other switch modules:
You cannot log in them with the system Web console. Use the CLI console or
connect directly to each module to operate it. See the User's guide for each
switch module for details.
2-128
Table 2-143 Switch module N information item
Item
Starts the switch module Web console as a new window. For
details, see the switch module Users guide.
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
Description